Cyclades AlterPath OnBoard Informacje Techniczne Pobierz pdf (Strona 322)

100

101

Configuring Private Subnets and Virtual Networks

282 AlterPath OnBoard Administrator’s Guide

multiple address ranges and it is not feasible to change previously-defined

device IP addresses.

• When it is important to hide the addresses of the connected devices from

users by the use of virtual IP addresses

The fields under “Virtual Network (DNAT) configuration” on the Network →

Private Subnets screen appear as shown in the following screen example.

Figure 8-17:Network → Private Subnets: Virtual Network Configuration

Fields

T To Configure a Private Subnet

1. Log into the Web Manager as an administrative user.

See “To Log Into the Web Manager for the Administrative User” on page

108, if needed.

2. Click the “Add Subnet” button.

The “Private Subnet configuration” dialog appears.

3. Enter a meaningful name for the private subnet in the “Private subnet

name” field.

4. Enter an IP address for the OnBoard within the private subnet’s network

address range in the “Onboard side IP address” field.

5. Enter a netmask for the private subnet in the “Subnet netmask” field.

Table 8-6: Fields on the Private Subnet Virtual Network Configuration Dialog

Field Description

Address

IP address to assign to the OnBoard from the virtual network’s address range.

For example, if the virtual IP address of the network is 10.0.0.0, 10.0.0.254

would a valid IP address for the OnBoard that could be entered here.

Netmask

Netmask (which is used in combination with the network address portion of

the “Address” above to define the address range of the virtual network.

1 2 ... 317 318 319 320 321 322 323 324 325 326 327 ... 501 502

Komentarze do niniejszej Instrukcji

Brak uwag

Cyclades AlterPath OnBoard Informacje Techniczne Strona 322

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Cyclades AlterPath OnBoard