Cyclades AlterPath BladeManager Instrukcja Obsługi Pobierz pdf (Strona 26)

12 MergePoint 5224/5240 Service Processor Manager Installer and Administrator Guide

Figure 2.4: Wiring the DC Power Terminal to Ground

3. Power up the SP manager.

Methods for Enabling Web Manager Access

An administrator who knows the password for an administrative user account and who has network

access to the MergePoint 5224/5240 SP manager must enter the SP manager’s DNS name or IP

address in a browser to bring up the Web Manager and to finish the configuration of users and

connected target devices.

Perform one of the tasks in the following table to set a static IP address or set up a DHCP server, so

that the basic network configuration can be done to enable the administrative user to use the Web

Manager to finish configuration.

RTN

-48vdc

+25%

- 36%

Ground

Green Ground Wire

Table 2.1: Methods for Enabling Web Manager Access

Method Considerations Where Described

Connect a terminal to the console

port and use the cli command to

assign a static IP address.

You must be at the same location as the SP

manager to make the local connection.

Connecting a Terminal

to Configure Basic

Network Parameters

on page 13

Use the DHCP-assigned address. DHCP is enabled by default. It relies on a DHCP

server that must be available to the SP manager.

To use a dynamic IP

address to access the

Web Manager: on

page 14

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 239 240

Brak uwag

Cyclades AlterPath BladeManager Instrukcja Obsługi Strona 26